At the core of Sapphire NITRO+ AMD Radeon RX 7900 XTX graphics card are the technologies of the NITRO+ House of PANTHEON. PANTHEON guarantees supreme cooling technology and many distinct features with each NITRO+ iconic feature standing as strong as the pillars of the PANTHEON.
SAPPHIRE NITRO+ sounds the call to battle and is every opponents worst enemy. The long-feared beast of Heat and the dreaded titan of Noise rise from the depths at every chance they can get. SAPPHIRE NITRO+ once again takes on the quest of saving the PC Gaming World and taming these feared monsters. And thus, the legendary NITRO+ House of PANTHEON was constructed to protect every NITRO+ Graphics Card, taming the monsters Heat & raging Noise.
Specifications
- Base Clock: 1855MHz
- Boost Clock: 2680MHz
- Memory: 24GB 20000MHz GDDR6
- Stream Processors: 6144
- Power Consumption: 420W
- Recommended PSU: 800W
- Form Factor: 3.5 Slots
- Dimensions: 320 x 135.75 x 71.6 mm
- AMD RDNA 3 Architecture
- Tri-X Cooling Technology
- Vapor-X Cooling
- High TG Copper PCB
- Optimised Composite Heatpipe
- Intelligent Fan Control
- Precision Fan Control
- Metal Backplate with ARGB
1855MHz
Base Clock
2680MHz
Boost Clock
24GB
GDDR6 Memory
6144
Stream Processors
About the Sapphire NITRO+ AMD Radeon RX 7900 XTX Graphics Card
Vapor-X Cooling
The Vapour Chamber is mounted in contact with the surface of the main chip and memory. Since the entire area transfers heat at the same rate, the Vapor-X module has been engineered to operate more efficiently than a copper heat sink at carrying away heat.
WAVE Fin Design
The WAVE Fin Design reduces friction when the wind goes into the fin module resulting in a reduction of the wind cut noise. The V-shape fin design on top of the GPU accelerates and centralises the air flow around the GPU to dissipate heat efficiently.
Die Casted Frame
The Die Casted Aluminium-Magnesium Alloy Frame enveloping the sides of the PCB help to strengthen the structural stiffness of the shroud to create a strong, scratch resistant and high quality finish that elevates the aesthetic and strength of the Sapphire NITRO+ AMD Radeon RX 7900 XTX graphics card. Overlaying the entire PCB, the die casted Frontplate Heatsink cools the VRM, Memory and Chokes resulting in superior heat dissipation for top-notch airflow and cooling performance.
Tough Metal Backplate
The all-aluminium backplate provides additional rigidity that guarantees nothing bends and dust stays out. It also helps cool your Sapphire NITRO+ AMD Radeon RX 7900 XTX card by increasing heat dissipation.
Angular Velocity Fan Blade
The Angular Velocity Fan Blade provides a double layer of downward air pressure which alongside the air pressure on the outer ring of the Axial fan, results in up to 44% more downward air pressure and up to 19% more airflow for a quieter and cooler operation when compared to the previous generations.
Optimised Composite Heatpipe
The composite heatpipes are fine-tuned for each individual cooling design with optimal heat flow, efficiently and evenly spreading out the heat to the entire cooling module.
Dual ARGB Light Bar
Enable the external synchronisation of RGB LEDs between the Sapphire NITRO+ AMD Radeon RX 7900 XTX graphics card and the motherboard using the 3-pin header in the tail. Gamers can then choose if the graphics card performs the RGB LED effects independently or if the motherboard acquires control.